 |
used a Tri-polymer clear
roofing sealant to seal ALL ridgevent nails and exposed nails
on the roof.. |
 |
parts of ridgevent were bent, I realigned them
for windblockage.... |
 |
straightened... |
 |
very top peak ridgevent was popped upward due
to attic pressure during storm...exposing ridgevent to wind
driven rain... |
 |
I reset it down properly... |
 |
and sealed all exposed nails on roof at ridges... |
 |
Vent is now reseated properly and plugs are
good in place... |
 |
total of 4 vents........ |
